Download PDF of this page  Print this page

SenSmart 7300 IR
[73002PYX-90-1-1028/100L/R2]

SenSmart 7300 IR
SenSmart 7300 IR
RC Systems’ battery-powered SenSmart 7300 IR wireless gas detectors provide the most advanced, economical, and reliable true-wireless combustible gas detection. These easy to use, ultra-low power devices are compatible with new low-power infrared sensors for hydrocarbon combustibles.
 
These SenSmart gas detection sensors are CSA certified for Class 1, Division 2 hazardous locations. Setup in hazardous areas requires only a simple magnetic wand.
 
Use the configurator below to request a quote on the SenSmart 7300 IR combustible gas detector you need. Contact RC Systems to place your order or to learn more.
 

Features of SenSmart 7300 IR Gas Detectors

  • CSA certified for Class 1, Division 2 hazardous locations 
  • Setup in hazardous area requires only simple magnetic wand
  • Power ON/OFF using magnetic wand only 
  • D-cell lithium battery powered for up to 6 months LEL operation
  • Available for both 900Mhz and 2.4Ghz 
  • Frequency-Hopping Spread Spectrum (FHSS) technology 
  • Transmits all setup information to wireless receiver 
  • Typical > 1 mile range with local dipole antenna (900Mhz) 
  • Detected gas data transmits on six second intervals 
  • Graphic display shows values, units, trend graph, alarm levels 
  • Non-intrusive, user-prompted calibration procedure 
  • Auto-recognition of Smart Sensors uploads calibration data and more 
  • Security settings to lock critical parameters 
  • 5 LEDs indicate alarms and communication status
  • Three adjustable independent alarm levels per sensor 
  • Fault supervision circuitry detects failed sensor and transmits warnings 
  • Magnetic mount option available 
 
Specifications
  • Area Classification: Division 2 Non-Incendive
  • Enclosure Type: Poly
  • External/Battery Powered Model: 10-30VDC Externally Powered
  • 2.4GHz or 900MHz Radio Frequency: 900MHz Radio (License Free in North America)
  • Antenna: 1000-2189 Rubber 2.5dBi Dipole (Standard)
  • Gas Type: Methane
  • Sensor Type: 10-1028 Smart Sensor, Low Power IR, Methane
  • Sensor Range: 0-100% LEL
  • Sensor Location: Remote Mount with Built in Splash Guard for Poly Enclosure