Products
Technical Info
News
Downloads
Languages
Representatives
Contact Us
RC SYSTEMS PRODUCTS

10-0314 and 10-0315 50 WATT POWER SUPPLIES FOR HAZARDOUS AREAS

  • Third party approvals include:
  • NEC Class 2. UL 508, LISTED as Industrial Control Equipment E198865 UL 1604, RECOGNIZED E246877 recognized for use in U.S.A. (UL 1604) and Canada (C22.2 No. 213-M1987) Hazardous Location Class I Div 2 T4 Groups A,B,C,D and Class I Zone 2 Groups IIA, IIB and IIC The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations as well as for Class I Zone 2 Groups IIA, IIB and IIC locations.
  • Division 2 Groups A,B,C,D is standard with the 10-0315.
  • Division 1 Groups B,C,D available with 10-0314 explosion-proof packaging
  • Output adjustable from 24-28VDC
  • LED "Power On" Indicator
  • "DC-OK" 30mA Source Output monitors output voltage and allows powering external light or relay
  • Wide 100-240 VAC input range
  • May be used in parallel to increase power or for redundancy
  • Designed to supply any type of load including battery charging
  • and unlimited capacitive and inductive loads
  • Output protected against overload, no-load and short-circuits
  • Internal Input fuse
  • >87% Efficiency
  • Quick Connect spring-clamp terminals
  • Life Expectancy = 44,000 hours at full load. MTBF = 2,456,000 hours


Model 10-0314 and 10-0315 power supplies are offered as high reliability 24 VDC power sources. Their 100-240VAC wide input range makes these supplies suitable for both domestic and international installations. The nominal 24 VDC output may be adjusted up 28VDC with the front potentiometer and an LED indicator and "DC-OK" 30mA current sourcing output makes it easy to detect problems. The DC-OK output remains "ON" untless the output voltage drops below 20V.

26 to 12 AWG wire sizes connects to quick connect spring clamp terminals. Outputs from multiple power supplies may be connected in parallel to increase power or to provide redundancy in case one supply fails. Primary applications include increasing the 24 VDC capacity of our ST-90 Controller product line. ST-90's are limited to 12 watts without addition of the 10-0314 or 10-0315.





8621 Hwy. 6 Hitchcock , TX   77563 Tel: 409-986-9800 Fax: 409-986-9880
Products | Technical Info | News | Downloads | Languages | Representatives | Contact Us | Home
Copyright 2010 RC Systems Co. Inc. All rights reserved.